Pro-Tek Chain Adjuster Bolt Repair Kit For 2008-2023 Kawasaki KLX140, 2004-2023 Kawasaki KX250F KX250X and 2006-2023 Kawasaki KX450F KX450X SAB-10 SAB-20 Swing Arm Saver Kit
$27.00
$15.50
You are looking at a Pro-tek SWING ARM BUDDY repair kit that replaces a chain
adjuster bolt after it seizes and breaks off in the swing arm of most
off road motorcycles. This particular kit works on 2008-2023
Kawasaki KLX140/KLX140L, 2017-2023 Kawasaki KLX140G, 2021-2023 Kawasaki
KLX140R/R F/R L, 2004-2023 Kawasaki KX250F/250X, 2021 Kawasaki
KX-250XC, 2006-2018 Kawasaki KX450F, 2019-2023 Kawasaki KX450/450X and
2022-2023 Kawasaki KX450SR models.
During
normal cleaning and/or operating in moist environments, water enters
and migrates to the rear of the swing arm causing the bolt to rust and
seize. Consequently, at the next chain adjustment interval, the bolt can
break off in the swing arm. This is becoming an increasingly common
problem with today's motocross, street and enduro bikes. Rather than
removing the swing arm from the bike, the SWING ARM BUDDY will allow the
average rider to fix the broken stud in approximately 10 minutes
without the expense of a machine shop, normally required for this
repair. It comes in two distinct kits.
A
SAB-10 single kit includes one 3/8" extractor drill bit and one special
thread fitting. A SAB-20 double kit contains one 3/8" extractor drill
bit and two special thread fittings. Also included are easy to follow
instructions.
- Replaces seized and/or broken chain adjuster bolts
- Kit allows you to replace broken bolts in approximately 10 minutes without having to remove the swing arm from the bike
- Comes with a high-speed hardened drill bit that is used to drill out the broken bolt, then a stainless steel threaded insert block can be easily and permanently inserted
- With threads replaced, a new adjustment bolt and lock can be used
NOTE:
Because we are drilling out the broken bolt, the new bolt will have a
larger head than the stock chain adjuster bolt. You will now use a 1/2"
or 13mm socket instead of the stock 13/32" or 10mm socket
These kits are brand new, still in original packaging complete with manufacturer warranty. These
are not the copycat "Chinese Kits" that are now flooding ebay made from
inferior materials. Those bolts will break and damage your bike. These are American made kits from a name you can trust- Pro-tek- a leader in the motorcycle industry for over 25 years.
